Cutting Machine

Cutting machine is used on cutting papers,such as grey chip board,black paper and the like.

Cutting machine

Specifications;

1,The thickness:100G=0.155MM.

2,The width of the machine:3400MM-3450MM.0.55MM-1.00MM can make to be rolls.

3,Density:0.62-0.65GSM2

4,Water propotion:12% (tolerance per pallet:±3% definitely)

5,Smoothness:The standard condition of Bendsen testing:0.55-1.4MM on the average level.≤2000ML/M,1.5-10.0MM on the average level,≤1600ML/M.

6,Size:A,the largest size is 1240mm*1346mm.B,the smallest size is 635mm*635mm.

7,Stiffness:The standard condition of Kdoad Pathe testing:0.55-1.55m(for the usual levels)

8,PH Degree:7.0-7.3

9,Packing:The height of each pallet is 1100MM.

Each corner has beam to protect. 

There are a film and liners to protect the goods.

Equipment specifications:

1) Thickness: 0.55-1.55mm (made by paper machine)

2) 1.6-10mm (made by veneer)

3) Substance: 100gsm=0.155mm

4) Machine width: 3,400-3,450mm

5) 0.55-1.00mm can be produced in rolls

6) Production capacity: 6,000MT/month1) Tightness: 0. 62-0.65gsm2) Water percentage: 12%, the tolerance for each pallet is ±3% (absolute humidity)3) Smoothness: Bendsen test in standard conditiona) 0. 55-1.4mm average: ≤2,000ml/minuteb) 1. 5-10.0mm average: ≤1,600ml/minute4) Size: a) Max. size: 1,240mm x 1,346mmb) Min. size: 635mm x 635mm5) Stiffness: Kdoad Pathe test in standard test condition0.55-1.5mm (the average level: direct veins paper/140-9,852mNm) 6) PH degree: cold extraction test in TNO (independent test condition): 7.0-7.3

7) Tensile strength (kN/m): direction vertically and horizontally≥16

8) Diagonal: error±2mm

9) Appearance peeled off: no delaminating, edge≤2.5mm

Packing:

1) Each wood pallet is 1.1m high with the paperboard

2) The corner is protected by protection strip

3) The whole pallet is wrapped by waterproof film and fixed by two pieces steel strip